Halocarbon's InfinX MRO 0.8 Oil, crafted with Halocarbon’s proprietary PCTFE Technology, is a high-performance specialty fluid designed for low-temperature calibration applications. This low molecular weight polymer of chlorotrifluoroethylene delivers excellent thermal heat transfer and maintains consistent fluidity in extreme cold, performing reliably around -100°C. Its non-flammability, chemical inertness, and compatibility with reactive gases, Lewis acids, and aggressive oxidizers make it ideal for demanding calibration environments. InfinX MRO 0.8 Oil also has comparable properties to 3M Fluorinert FC-3283 & Novec 7500 in many applications.

No Flash Point
Non Flammable

APPLICATIONS

Low Temperature Calibration Bath Fluid
Fluke Calibration Bath Systems
- Fluid 7380
- Fluke 7381
- Fluke 7081
Kaye CTR-80 Ultra Low Temperature Bath Systems
Isotech Temperature Calibrators
Freezers & Refrigerators
Cold Rooms
Ultra-Low Freezers
Freeze Dryers

PHYSICAL PROPERTIES

PROPERTY	UNITS	InfinX 0.8
Form		Liquid
Color		Colorless
Boiling Point	°C	>133
Flash Point	°C	None
Density	g/ml	1.7 to 2.0
Kinematic Viscosity	cSt	0.7 to 820 @ 40°C
Pour Point	°C	-129
Cloud Point	°C	<-129
Refractive Index		1.383
Vapor Pressure	torr	7.3
Specific Heat	J/kg-K	1089
Heat of Vaporization	cal/g	28
Surface Tension	dyne/cm	18.5
Thermal Conductivity	W/m-K	0.07
Dielectric Strength	kV (2.54mm gap)	41
Average Molecular Weight	aum	327

MATERIAL COMPATIBILITY

Compatible Materials

Ethylene propylene rubber	Polyvinyl alcohol	Neoprene
Teflon and other fluorinated plastics	Chlorinated polyethylene	Rigid PVC
Viton, Fluorel	Polyimides	Polycarbonates
Fluorosilicone	Cured epoxies	Urethanes
EPDM (ethylene propylene diene rubber)

Incompatible Materials

Reacts with active metals like Sodium and Potassium, Amines (including additives), liquid Fluorine and liquid Chlorine Trifluoride. Caution should be used with Aluminum and Magnesium under conditions of large shear forces such as those found in threaded connections.

Most solvent-resistant elastomers and plastics are unaffected by Halocarbon fluids. However, within certain temperature ranges the fluids may dissolve in and seriously weaken the following materials:

Buna-N (butadiene/acrylonitrile)
Buna-S (butadiene/styrene) rubber
Silicone rubbers
Natural rubber
Polymers or copolymers of chlorotrifluoroethylenePVC (polyvinyl chloride)

COMPLIANCE

PACKAGING

1 Gallon Jug (11lb/55kg)
5 Gallon Pail (44lb/20kg)
55 Gallon Drum (551lb/250kg)
275 Gallon Tote - Available Upon Request

SHELF LIFE & STORAGE

Shelf life is 60 months from the date of manufacture when stored in the original packaging materials and stored under normal conditions. TMC will re-certify material every 5 years up to 20 years.

DISPOSAL & RECYCLING

This fluid can be recycled and reused. Help protect the environment, and don't pay for expensive disposal services. TMC Industries can reclaim your used fluorinated fluids, restoring them to like-new condition, and save you up to 50% in replacement fluids while protecting the environment, or TMC will recycle your fluid free of charge (conditions apply).

TMC Reclaimed Fluids are tested to meet new product specifications. It will be clear and odorless, and a Certificate of Analysis is issued with every order.

TMC Industries offers a 100% satisfaction guarantee on all of our reclaimed fluids. We back this up with a no questions asked refund policy. To learn more, click HERE.

All Halocarbon

INFINX MRO KF207 GREASE

INFINX MRO KF107 OIL

INFINX MRO KF106 OIL

INFINX MRO KF205 GREASE

INFINX MRO KF2R5 GREASE

INFINX MRO KF2R7 GREASE

INFINX MRO KF206 GREASE

INFINX MRO KF2R6 GREASE

INFINX MRO KF102 OIL

INFINX MRO KF105 OIL

INFINX HALOVAC ULTRA GREASE

HALOCARBON INFINX MRO 0.8 Oil